Knowledge

How to select the appropriate cutting amount for milling cutter

For end milling cutter, try to select a large amount of strap cutter, and then select a larger feed rate. The factors affecting the cutting quantity include tool material, tool geometric parameters, workpiece material, process category, machining process, specific service conditions, such as cutting fluid, machine tool, chuck and so on. Even if many fans ask about the cutting quantity parameters, there is no accurate answer. Then, there are generally three methods to determine the cutting quantity.

One is to check the feed rate, cutting speed and tool service time by checking the manual. The data in the manual is for reference only. The data in the manual is a mathematical model made by cutting tests under specific conditions. The specific use conditions and test conditions are different from our actual use. Certain modifications must be made according to the actual machining conditions. At the same time, during reuse, the machining effect must be adjusted appropriately according to the machining conditions, so as to obtain the best cutting consumption.

Second, consult the product album of the tool manufacturer. While introducing the products, the product album recommends the corresponding cutting speed and feed rate. It will also be specially stated that it must also be adjusted according to the actual situation.

The third is cutting test. This method can obtain reasonable cutting quantity and high cost. If the processing order quantity is not large, it is not recommended to try. The test conditions shall be the same as the actual situation as far as possible, and the cutting amount obtained is more accurate.


You Might Also Like

Send Inquiry