Knowledge

The range of use of o flute end mill: Shank 3.175 and 4mm: Widely used in acrylic, PVC, two-color plate, aluminum plastic plate, copper plate, aluminum plate, nylon, all kinds of w

Engraving machine related data and adjustment Settings: Spindle speed reference data: 24000r/min, not less than 20000r/min; Feed speed reference data:7-8m/min; Suitable for high-po

Double flute milling cutter: the chip slot is large, so it is easy to discharge the iron chip, but the tool section area is small, so the rigidity is reduced, so it is more used fo

End milling cutter is a CNC machine tool used most of a milling cutter, end milling cutter cylindrical surface and end face are cutting cutter, cylindrical cutting edge is the main

When milling, the speed of the table forward is the feed speed. If the feed rate is divided by the number of blades, it is the feed rate per blade. The feed speed is closely relate

Cutting speed has a great impact on the durability of the milling cutter, improve the cutting speed, so that the cutting temperature rises, so that the durability of the milling cu

1, from the shape of chips, chips become thick, flake, chip color purple smoke due to chip temperature rise. 2, the roughness of the workpiece surface is very poor, and the surface

Core thickness is an important factor to determine the rigidity and chip slot of end milling cutter. The core thickness of integral end milling cutter is generally 60% of the outer

Helix Angle: the greater the helix Angle of the end milling cutter and the longer the contact line between the workpiece and the blade, the smaller the load imposed on the blade pe

For stainless steel materials with low thermal conductivity and great influence on blade tip heat, the use of large spiral Angle end milling cutter is helpful to prolong tool life.

1, From the shape of chips, chips become thick, flake, chip color purple smoke due to chip temperature rise. 2, The roughness of the workpiece surface is very poor, and the surface

1, High speed tool steel(referred to as high speed steel, front steel, ect.), devided into general and special purpose high speed steel two kinds. It has the following characterist