Knowledge
-
30
Jun-2025
The application of titanium coating and DLC coatingIn milling, the choice of coating directly affects the tool life, cutting performance and processing efficiency. The application of titanium coating (such as TiN, TiAlN, TiCN, etc.
-
21
Jun-2025
Key Factors Affecting Feed Rate SelectionChoosing the right feed rate for a particular machining operation requires a combination of the following factors: Material: The hardness, strength, and toughness of the material (
-
14
Jun-2025
The difference between straight groove and spiral of pagoda drill1. Chip removal method Straight groove drill: The groove type is a straight channel, and the chips are discharged downward by gravity or coolant pressure, which is suitable for thr
-
07
Jun-2025
Measures to solve the problem of milling cutter turning black during use1. Optimize cutting parameters Reduce speed and feed: Appropriately reduce cutting speed (Vc) and feed per tooth (fz), for example, reduce speed by 20%, and reduce feed to below 0.
-
30
May-2025
TCT 2 flute comprssion bits and 3 flute1. Cutting efficiency and feed speed Double-edged knife: Fewer blades, large chip removal space for single cutting, suitable for high-speed and low-load processing. Advantages: Low
-
24
May-2025
Double-edged straight bits and spiral bits' different application scenariosDouble-edged straight cutter Material: Suitable for soft materials (such as wood, plastic) or metal processing with low precision requirements. Processing type: slotting, contour m
-
17
May-2025
Product selling points of double-edged left-hand milling cutterThe double-edged left-hand milling cutter is a specially designed cutting tool. Its unique left-hand (counterclockwise) cutting direction and double-edged structure give it signifi
-
10
May-2025
How to process high-speed steel raw materials into milling cuttersHigh-speed steel (such as W18Cr4V, M2, etc.) needs to go through a series of precise heat treatment and machining steps from raw materials to milling cutters. The following is a ty
-
03
May-2025
Why does the CNC milling cutter turn black during use?1. High temperature oxidation (main cause) Cause: The high temperature generated during cutting (especially when processing difficult-to-process materials such as stainless steel a
-
18
Apr-2025
Knowledge points of double-edge taper ball end milling cutter1. Basic structure Double-edge design: two cutting edges are symmetrically distributed, taking into account cutting efficiency and balance, and reducing vibration. Tapered neck: th
-
12
Apr-2025
Slot milling cutterSlot milling cutter is a special cutting tool used to process grooves, keyways or grooves on the surface of workpieces, and is widely used in the field of mechanical processing. Th
-
05
Apr-2025
Corn cob cutters1. Definition & Purpose Corn cob cutters are multi-flute end mills with a serrated or "corn cob" design along the cutting edges. Primarily used for high-efficiency ro
